MSZ50H Injection Blow Molding Machine

MSZ50H Injection Blow Molding Machine
GET QUOTATION


/// Techhnical Features:

Special designed dual-cylinder clamping unit,mould open and close fast,idle cycle time fast,efficiency high.
Dual proportional hydraulic system,precision control,energy saving 25% more than vane pump drive.
Horizontal injection design,plasticating reliable and operation easy.
Single crossbeam style clamping system,easy for mould amounting
Generality high,same mould fitting as MSZ45 and MSZ40.

/// Optional:

Servo pump drive, 25%-45% energy saving is available.
In mold labeling solution, one stop procedure, save cost of labor and workshop, completely fitting and excellent appearance.

No. of cavities 2 4 6 7 8 9 10 12 13
Neck Diameter(mm) 45 40 35 35 30 25 25 20 10
Body Diameter(mm) 80 60 50 45 40 35 30 25 20
Max. Height(mm) 220 180 140 100 80 70 60 50 40
Max. Volume(ml) 1000 400 200 100 60 40 30 20 15
Injection system Unit MSZ50H
Screw Diameter mm 45 50
Screw L/D L/D 23:1 23:1
Injection weight(HDPE) g 241 298
Max.screw speed rpm 10-235
Heating capacity KW 10
Clamping system
Clamping force of injection KN 500
Clamping force of blowing KN 89
Max.Platen size(L*W) mm 560×390
Min.Mold thickness(H) mm 240
Heating capacity of mould KW 3.6
Stripping system
Stripping stroke mm 270
Dry cycle sec 3.5
Driving system
Motor power KW 22
Hydraulic pressure Mpa 15
Product range
Suitable bottle range ml 5-800
Max.bottle height mm ≤200
Max.Dia.of bottle mm ≤100
Others
Min.Air pressure Mpa 1.0
Discharge rate of compressed air M³/min ≥0.7
Water flowage M³/h 4
Total rated power with mold heating KW 35.6
Dimension(L*W*H) M 4.11×1.44×2.5
Net weight ton 5.7
Scroll to Top